The MS5534 pressure measurement module consists of a SMD-hybrid device including a piezoresistive pressure cell and an ADC-Interface IC. It provides 16 Bit data words from a pressure- and temperature-dependent voltage. Additionally the module contains 6 readable coefficients for a highly accurate software calibration for the pressure and temperature measurement. The MS5534 is a low-power, low-voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used to communicate with a microcontroller.
The devices have a very low standby-current. The optimal compromise about refresh rate and average current consumption can individually be defined by the application software.
MS5534-CM: protected by a metal ring filled with silicon gel on a ceramic hybrid 9x9mm (outdoor applications)
Pressure range: 0.15 … 16 PSI abs.; operating temperature: -40 … +125°C
MS5534-CP: protected by a plastic cap and one drop of silicon gel on a ceramic hybrid 9x9mm
Pressure range: 0.15 … 16 PSI abs.; operating temperature: -40 … +125°C
The MS5534-C is fully software compatible to previous versions (MS5534-A and MS5534-B)
* Modules are pressure sensors, whose output signals have to be calculated by an external microprocessor.
Accessories for the MS5534
Also available are sample boards, which can be used together with the USB Development Kit to quickly evaluate the sensors and build prototypes, as well as light and dust protection caps.
Features
- Pressure range: 10 – 1.100 mbar, absolut
- Temperature range: -40 °C – 125 °C
- Supply voltage: typ. 3 V
- Resolution pressure: 0.1 mbar
- Resolution temperature: 0.01 °C
- current consumption: 4 μA (Standby: max. 0.1 μA)
- digital 3 wire interface (16 bit)
- Automatic power-down operation
- Media resistant
- Reflow capability
- RoHS and REACH compliant
Applications
- Mobile altimeters and barometric measuring systems
- Weather stations
- Sports watches
- GPS receiver
- Air traffic control
- Performance measurement in sports equipment
Downloads
- MS5534C pressure sensor datasheet
- Application note 509: MS5611 – Precise altitude measurement with pressure sensors (Also applies to MS5534)
- Application note 1517: Minimum and maximum values of the MS5534-CM
- Application note 1502: Software library for the pressure sensor modules MS5534 and MS5535
- Application note 1510: Communication between microcontroller and sensor via SPI
- Application note 1520: C-code examples for the MS56xx and MS58xx pressure sensor series (Also applies to MS5534)
- Application note 1808: Processing instructions for soldering
- White paper 02: How to measure absolute pressure using piezoresistive sensing elements
For information on prices and delivery times or if you have any technical questions, please contact info@amsys-sensor.com.